濟南機箱機柜加工的品質如何考量？直接受制造工藝的好壞的影響，工藝較高機箱的鋼板邊沿不會泛起毛邊、銳口、毛刺等現象，并且裸露的邊角都經由折邊處理，不易劃傷裝機者的手。各個插卡槽位的定位也都相稱，不會泛起配件安裝不上或者錯位的尷尬情況。

How to consider the quality of Jinan cabinet processing? Directly affected by the quality of the manufacturing process, the edge of the steel plate of the case with high technology will not have burr, sharp edge, burr and other phenomena, and the exposed edges and corners are processed by folding, which is not easy to scratch the hands of the installer. The positioning of each card slot is also appropriate, which will not lead to the embarrassing situation that the accessories cannot be installed or are misaligned.

1、看鋼板，鋼板要厚，你用手指敲一下，就能感覺到哪些厚哪些薄了。

1. Look at the steel plate. The steel plate should be thick. You can feel which is thick and which is thin by tapping with your fingers.

2、看噴漆，一個合格的機柜，所有的鋼材都需要噴漆，而且噴漆要平均，這樣才能良好地防銹、防塵等。

2. Look at painting. For a qualified cabinet, all steel should be painted, and the painting should be even, so that it can prevent rust and dust.

3、看架構布局，一般來說，擋板要多，而且具有散熱孔，一些用來固定線纜的鐵皮要包邊，預防損壞線纜。側壁風扇應安裝在機柜后壁，由于設備后部產生大多數的熱量。

3. According to the structure layout, generally speaking, there should be more baffles, and there should be cooling holes. Some iron sheets used to fix cables should be wrapped to prevent damage to cables. The side wall fan shall be installed on the rear wall of the cabinet, because the rear of the equipment generates most of the heat.

4、看配件，因為安裝中包括網絡電纜、電信電纜和電源電纜，需要購買鉤環帶或帶齒的帶子來地把電纜有序的固定在機柜里面。假如機柜帶有電纜治理模塊使電纜可以直接固定在垂直安裝軌內，則再好不外。

4. Look at the accessories, because the installation includes network cable, telecommunication cable and power cable, and you need to buy hook and loop belt or toothed belt to fix the cable in the cabinet orderly. If the cabinet is equipped with a cable governance module, the cable can be directly fixed in the vertical installation rail, it is no better.

5、看玻璃，玻璃要厚一點的，還要留意玻璃的周邊是否有裂縫，假如有裂縫，就意味著有隱患了，還有要留意是否棘手。

5. Look at the glass. The glass should be thicker, and pay attention to whether there are cracks around the glass. If there are cracks, it means there are hidden dangers, and pay attention to whether it is difficult.

6、看功能：先考慮的應是性。

6. Look at function: sex should be considered first.

7、看散熱，估計一下你的設備發熱量有多大，一般來說，柜頂都有二到四個風扇，風扇都是多多益善的。還有一些用來固定機架的螺絲、螺母等，也要足量。不因日后擴展而帶來配件不足的麻煩。

7. Look at the heat dissipation and estimate how much heat your equipment generates. Generally speaking, there are two or four fans on the top of the cabinet. The more fans are, the better. There are also screws and nuts used to fix the rack, which should be sufficient. It will not cause the trouble of insufficient parts due to future expansion.

機箱機柜基本功能的發揮就是為設備帶來的工作環境的提供，機箱機柜為設備帶來較好的呵護，機箱機柜從品質到設備與制作，都是針對著利于機箱機柜內部的設備執行而進行著，更多相關事項就來我們網站http://www.dxcsp.com咨詢吧！

The basic function of the chassis and cabinet is to provide the working environment for the equipment. The chassis and cabinet provide better care for the equipment. The quality, equipment and production of the chassis and cabinet are all aimed at facilitating the implementation of the equipment inside the chassis and cabinet. More related matters are available on our website http://www.dxcsp.com Ask!