一個產品面世之前，需要先對產品的市場效益進行綜合分析，或者要確認設計圖紙與實物是否有差別或者設計是否合理，直接做模具有很大的風險。因此，濟南手板制作是企業必不可免的一道工序，為了滿足客戶對產品高品質的檢驗要求，針對性地提供手板制作。比如外觀手板、結構手板以及功能手板。

Before a product is launched, it is necessary to conduct a comprehensive analysis of the market benefits of the product, or to confirm whether the design drawing is different from the real object or whether the design is reasonable. It is very risky to directly make the mold. Therefore, Jinan prototype production is an inevitable process for enterprises. In order to meet customers' requirements for high quality inspection of products, we provide targeted prototype production. Such as appearance, structure and function.

由于目前市場上多數產品愈來愈傾向于智能化，因此功能手板在手板領域變得更加重要。手板是驗證產品可行性的一步，是找出設計產品的缺陷直接有效的方式。手板制作通常還需要進行小批量試產找出不足并加以改善。

As most products on the market are more and more intelligent, the functional prototype becomes more important in the prototype field. Prototype is a step to verify the feasibility of products, and a direct and effective way to find out the defects of designed products. Prototype production usually requires small batch trial production to find out deficiencies and improve them.

通常而言，企業設計完成的產品難以做得很好，直接生產一旦有缺陷將全部報廢，浪費人力、物力和時間。而手板相當于樣品，制作周期短，損耗人力物力少，為產品定型量產提供充足的依據。

Generally speaking, the products designed by enterprises are difficult to do well. Once there are defects in direct production, they will all be scrapped, wasting manpower, material resources and time. While the hand board is equivalent to the sample, with short production cycle and less manpower and material resources, it provides sufficient basis for product finalization and mass production.

手板按其所要實現效果，可分為外觀手板，結構手板，功能手板。外觀手板主要檢測產品的外觀設計，要求外觀精美，顏色準確，對內部的處理要求不高；結構手板主要檢測產品的結構合理性，對于尺寸要求較高，對外觀要求相對較低。

According to the effect to be achieved, the prototype can be divided into appearance prototype, structure prototype and function prototype. The appearance board mainly tests the appearance design of the product, which requires exquisite appearance and accurate color, and does not require high internal treatment; The structural prototype mainly tests the structural rationality of the product. It has high requirements for size and relatively low requirements for appearance.

國外對這類要求尤為嚴格；功能手板要求實現跟真正的產品一樣完全相同的外觀，結構及功能，可以理解為未上市的成品，是要求高，難度大的一類手板。

Such requirements are particularly strict abroad; The functional prototype requires the same appearance, structure and function as the real product. It can be understood as an unlisted finished product. It is a type of prototype with high requirements and great difficulty.

當前，企業客戶大多對產品設計的要求越來越高，不僅要求外觀精美，更重要的是要實現其功能性與結構的合理。因此功能手板的優勢就得以凸顯。

At present, most enterprise customers have higher and higher requirements for product design, not only for beautiful appearance, but more importantly, to achieve reasonable functionality and structure. Therefore, the advantages of the functional prototype can be highlighted.

功能手板的制作可以避免直接開模具的風險性，由于模具制造的費用一般很高，比較大的模具價值數十萬，如果在開模具的過程中發現結構不合理或其他問題，其損失可想而知。

The production of the function board can avoid the risk of directly opening the mold. Because the cost of mold manufacturing is generally high, the relatively large mold is worth hundreds of thousands. If the structure is unreasonable or other problems are found in the process of opening the mold, the loss can be imagined.

而且手板可以使產品面世時間大大提前，由于手板制作的超前性，你可以在模具開發出來之前利用手板作產品宣傳，甚至前期的銷售、生產準備工作，及早占領市場。您有需求就來我們網站http://www.dxcsp.com進行咨詢吧！

Moreover, the prototype can greatly advance the time of product launch. Because of the advanced nature of prototype production, you can use the prototype for product promotion before the mold is developed, and even early sales and production preparations to occupy the market as early as possible. Come to our website if you need http://www.dxcsp.com Consult!